升了，升级过程很简单，不象GRD要搞老半天，感觉固件改进不大，就是多了网格线，速度没感觉快了，不过这只是1.01版，我估计到2.01版的时候大家就满意了，这个至少说明适马在加班加点地改进这台让人又爱又狠的机器。
倒是觉得SPP有了长足进步，边缘的绿色明显减少了，基本上不用到PS里再处理那个讨厌的绿色，很爽！

晕倒，发错了图片了，，，

晚饭，室内，放桌上，

http://www_sigma-dp1_com/software/firmware/ 这个页面慢得要命

下载软件用这个吧：

http://www_sigma-dp1_com/software/firmware/dp1v101.bin

净机身连遮光罩多少钱嘛？

在日本买并不便宜，全套附件(保护套管，遮光罩，两块原厂电池，光学取景器，挂绳，闪光灯，灯和机身的软套套，USB线，接机身的DC电源线等），加上两张松下的4G卡，还有一个肯高的UV镜，接近9千RMB了。我朋友用塑料袋装着，谁也没管就走过海关了

Please use 256MB or larger SD/SDHC card and format the card in the camera body.

* To avoid loss of your important data, please check the SD/SDHC card before formatting.

至少要256m容量以上的卡,在相机里格式化

Please connect a card reader containing the SD/SDHC card or the DP1 to your computer and click the Download button or right click on the mouse (if you use a Macintosh computer, please press Control + click) to store the firmware file in the SD/SDHC card root directory (Please do not store in subfolder such as "SDIM").
利用读卡器将下载的文件直接放到卡的跟目录下

* If the firmware is downloaded whilst the camera is connected to your computer, please turn off your camera before disconnecting it from your computer.
如果通过相机连接电脑下载文件的,需要在断开连接前关掉相机电源

Insert the SD/SDHC card containing the firmware into your camera and turn on the DP1.
将卡放到相机里,开机

* It is not necessary to connect the camera body to your computer.
这个时候不需要将你的相机连接到电脑上

Press the MENU/OK button on the back of the camera to display the Set Up menu.
Select the "Firmware" menu.

按菜单键,进入菜单,在设定菜单最后一项就是Firmware(韧体,台湾话)
  Press the right button of the 4-Way Controller to open the sub menu and select "Firm update", then press the MENU/OK button to display the following message.
用十字键打开下一级菜单,就可以看到韧体更新的选项
Press the MENU/OK button again to start the firmware update. (It takes about two minutes to update.)
When the "Firmware update is completed" message is displayed, the update has finished.
然后就有中文提示按菜单键开始更新

* Please do not operate the camera until the "Firmware update is completed" message is displayed.
过程会中屏幕会一直闪动"载入进行中"的提示,在显示更新完成前请不要操作相机

Select "Firmware" from the Set Up menu and confirm the firmware is updated to "Ver.1.01" with "Current version". If "Ver.1.01" is displayed, the update is complete.
查看版本情况可以在上述菜单软件版本的选项中查看
If the "Firmware update has failed!" message is displayed during firmware update, please carry out the above installation again. If the update continues to fail, please visit the following technical support page for our World Network contact details.
如果显示更新失败,请重复上述步骤,如果还是不行的话,就要访问下面这个网站了:

World Network: http://www_sigma-photo_co_jp/english/network/

大概就一分钟,很快的,开始试用,有什么新发现欢迎大家讨论

呵呵，简单升级韧体，除了网格线，没有发现其他变化

请问zephyrus :

现在日本的价格多少(合人民币)? 过关要不要加税?

哦，此君以前也在你的PP中出现过，故有此一问。

我只是说那个软件对画质的影响，你按我说的作个对比（处理完之后别关闭，保存，然后用acdsee或者XP自带的看图软件或者其他，打开你刚保存的这个），可以很明显的看出来（拿你以前书摊的那张对比最明显）。很久以前也试过用它resize然后再到ps里面处理，因为他resize好像可以调节锐化，这样看起来细节会很多（其实是很噪）

升级的过程是怎么样操作的？？

   1. Corrects the phenomenon of intermittent camera freeze under certain conditions.
   2. The accuracy of the indication of the number of images that can be recorded with RAW format has been improved.
   3. The grid display mode for picture taking is added to the LCD monitor. (It cannot be used in MF mode and movie mode)

1、改正有时候会死机
2、使用raw时计算剩余可拍张数的准确性
3、取景网格线（MF和视频模式下不可用）

还没怎么试，不知道进步了什么。

很好呀。