问题已解决！非常感谢！改B机网关为A2卡IP、设置代理后，正常！
无忌藏龙卧虎哇！

[gyo6 编辑于 2010-05-16 10:09]

[2010-05-29 15:35 补充如下]

这年头用域服务器来做※※※※※的网管真的不多了。

[2010-05-15 21:41 补充如下]

靠墙思考后发现，A机只能安装windows200x才行，而且要安装"路由和远程访问服务"

楼主如果真的想解决问题的话放狗搜“windows 2003 软件路由器”即可，搜索结果图文并茂，相信楼主能自己解决。

将A机作为路由器，A2卡IP地址作为B机的网关，如果B机需访问外网，必须要通过A机（网关）完成路由指向域服务器即可，相关代理设置和A机一样。

[2010-05-15 21:41 补充如下]

靠墙思考后发现，A机只能安装windows200x才行，而且要安装"路由和远程访问服务"

楼主如果真的想解决问题的话放狗搜“windows 2003 软件路由器”即可，搜索结果图文并茂，相信楼主能自己解决。

将A机作为路由器，A2卡IP地址作为B机的网关，如果B机需访问外网，必须要通过A机（网关）完成路由指向域服务器即可，相关代理设置和A机一样。

[2010-05-15 22:01 补充如下]

kao
无忌的帖子修改功能好奇怪哦

只用route命令就可以搞定？hicool根据lz的具体情况直接给出答案吧

还有，网管有什么错误？学习学习

无忌真的是藏龙卧虎之地,各行各业高手如云,非常感谢。但俺还是看不懂弄不成，回头把子网掩码和网关发来请教！


那就不关俺事了^_^

[gyo6 编辑于 2010-05-14 02:05]

还是给你一条思路吧
将A机作为路由器
A1卡作为外网接口，IP地址是10.80.28.24 还有A1的掩码和A1网关楼主没有说
A2卡作为内网接口，IP地址是192.168.16.39 还有A2的掩码和A2网关楼主也没有说
B机的的网卡IP地址不变仍然是192.168.16.103 它的掩码和网关应该和A2一致

现在如果想让B机上外网，必须让B机将网关指向A2卡的IP 192.168.16.39 ,并且让A机完成外网的路由指向即A1的网关或直接指向代理服务器10.80.1.61。
剩下的就是B机和A机一样的上网方式在IE里设置代理就行了
具体实现请使用ROUTE 命令，帮助如下。

============华=丽=分=割=线==============

Manipulates network routing tables.

ROUTE [-f] [-p] [command [destination]
                  [MASK netmask]  [gateway] [METRIC metric]  [IF interface]

  -f           Clears the routing tables of all gateway entries.  If this is
               used in conjunction with one of the commands, the tables are
               cleared prior to running the command.
  -p           When used with the ADD command, makes a route persistent across
               boots of the system. By default, routes are not preserved
               when the system is restarted. Ignored for all other commands,
               which always affect the appropriate persistent routes. This
               option is not supported in Windows 95.
  command      One of these:
                 PRINT     Prints  a route
                 ADD       Adds    a route
                 DELETE    Deletes a route
                 CHANGE    Modifies an existing route
  destination  Specifies the host.
  MASK         Specifies that the next parameter is the 'netmask' value.
  netmask      Specifies a subnet mask value for this route entry.
               If not specified, it defaults to 255.255.255.255.
  gateway      Specifies gateway.
  interface    the interface number for the specified route.
  METRIC       specifies the metric, ie. cost for the destination.

All symbolic names used for destination are looked up in the network database
file NETWORKS. The symbolic names for gateway are looked up in the host name
database file HOSTS.

If the command is PRINT or DELETE. Destination or gateway can be a wildcard,
(wildcard is specified as a star '*'), or the gateway argument may be omitted.

If Dest contains a * or ?, it is treated as a shell pattern, and only
matching destination routes are printed. The '*' matches any string,
and '?' matches any one char. Examples: 157.*.1, 157.*, 127.*, *224*.
Diagnostic Notes:
    Invalid MASK generates an error, that is when (DEST & MASK) != DEST.
    Example> route ADD 157.0.0.0 MASK 155.0.0.0 157.55.80.1 IF 1
             The route addition failed: The specified mask parameter is invalid.
(Destination & Mask) != Destination.

Examples:

    > route PRINT
    > route ADD 157.0.0.0 MASK 255.0.0.0  157.55.80.1 METRIC 3 IF 2
             destination^      ^mask      ^gateway     metric^    ^
                                                         Interface^
      If IF is not given, it tries to find the best interface for a given
      gateway.
    > route PRINT
    > route PRINT 157*          .... Only prints those matching 157*
    > route CHANGE 157.0.0.0 MASK 255.0.0.0 157.55.80.5 METRIC 2 IF 2

      CHANGE is used to modify gateway and/or metric only.
    > route PRINT
    > route DELETE 157.0.0.0
    > route PRINT

----------------------

只依稀记得大学宿舍时代用wingate ，sygate那类软件。。。。