有朋友建立了   群号：202742526 欢迎交流

弄到主题管理了，115网盘的如果过期了就通知下续期
固件工具已经打包，有需要者下载咯 水平低，无忌上，图无法排版
做成doc了
http://115_com/file/dn9mdxfn
最新版本：12月22日
https://bitbucket_org/hudson/magic-lantern/downloads/magiclantern-2011Dec22.550D.60D.600D.50D.500D.zip

比较有用的功能（个人感觉）：
Audio
左右声道音量设置

LiveV
zebras 弱光强光提示
focus peak 峰值对焦
magic zoom 同屏画中画式放大焦点
cropmarks 构图辅助线
defishing 专供三洋8mm鱼眼矫正（三洋给了啥好处了么？）
spotmeter 中间亮度级别
histogram 可调RGB和亮度直方图，跟原厂不同看法

expo
没啥特别的

Movie
bit Rate 视频比特率 随便录录可以降低码率，60D最高编码性能52Mbps，也可以把480p码率提高，不过貌似没意义，直接用1080不就是了。
movie restart 录满29：59后自动开始录制（即使格式化为exFAT文件格式无4G限制，也没办法录制一段超过半小时的视频）
shutter lock 视频锁定快门
FPS override 帧速调整 1080P可设置4-32fps,720p可以设置4-60fps
Tv override 视频帧间曝光时间调整 1/3.99-1/52747s 瀑布汗，超出原定的1/8000最高快门了
HDR video 按照曝光差距拍出间隔帧视频（一低一高），用于后期电脑处理合成HDR视频

shoot
HDR bracketing 自动拍设置好的多重曝光照片（2-5张 5EV）
intervalometer 按照设置的时间间隔自动拍摄（拍星轨类好帮手）
bulb timer B门，可设置最高480分钟曝光时间
audio remoteshot 在周围环境安静的情况下，你拍下手就能代替按快门了，虽然不能代替红外遥控，不过在自家自拍倒是好帮手

focus
trap focus 陷阱对焦，按住快门，守株待兔等玩意到焦点内自动拍
follow focus 手动跟焦 用方向键跟，比手摇精细，可以设置每次移动一个齿轮位[误]（就是能很精细移动焦点就是啦）
最下面的是镜头当前焦段信息（副厂头大多悲剧无法读取数据，按到LV模式大部分可获得距离信息）
focus dist 焦点位置
hyperfocal 是超焦距，超广头用处多些
DOF near 进入景深距离
DOF far  淡出景深距离
display
各种外接设置

tweaks

play

config

power
各种省电设置

debug
各种试用期功能，最好别去点，省得吃螃蟹

help
不废话了

[FSAA 编辑于 2011-12-23 21:54]

本帖最后由 FSAA 于 2012-4-1 00:09 编辑

RAW 视频的截图

没人提RAW视频啊

群满了，进不去。想请问下，我用600D 用圣诞节版 峰值对焦只能拍一张照片 之后就满屏点点。升级到2.3打开峰值 直接不显示。但是在预览里面能用DISP调出峰值。

哪位泡菜也有同样问题知道如何解决的，感激不尽。谢谢！

学习

我的60D和你的情况一样，折腾了几十次，换卡、换电脑、换ML版本。。。依旧刷不了
昨天终于刷成功了
先到佳能网站下载原厂的1.1.0的固件重新再刷一次
然后按原来正常的刷机程序执行即可
呵呵，就是这么简单

请加群202742526

网盘上的是2011年的固件，该如何更新到最新的固件？

又更新了，辛苦辛苦，要是ML能将耗电大的问题解决了，那真是善莫大焉

3月24日版本

http://groups_google_com/group/ml-devel/attach/147c3c744c97bfb8/autoexec.bin?part=4

更新内容

Hi,

You've probably noticed that I've been a little slow during the last few
weeks. This was due to my studies - I've got a PhD degree in engineering

I'm very happy to see the progress from other developers, for example,
Sztupy with Android ML controller and Lua scripting, Coutts with the
initial work in porting ML on 5D classic, and of course, g3gg0 with the new
FPS discoveries and firmware analysis.

Now I've been trying to get back to speed, so here's another experimental
update.

The main feature is full control over FPS, which was researched here:
http://groups_google_com/group/ml-devel/browse_thread/thread/b1dcd030...

In a nutshell: we can now record at very low FPS (lower limit being close
to 0.2 FPS); also, we can get exact FPS values (24.000 fps) or even extreme
jello effects.

Details:

There are two degrees of freedom for obtaining a given FPS (we can change
two timer registers). Besides FPS changing, each register has some
interesting side effects: one of them alters the amount of jello effects
(rolling shutter), the other one increases exposure time (converging to
1/fps at very low frame rates). So, to get some fixed FPS value, there are
a lot of solutions; we may choose one according to some other criteria, for
example:

- 360 degree shutter speed at very low FPS (we already have this in
previous implementation)
- Exact FPS values (24.000, or 30.000 on 5D2)
- Extreme rolling shutter (try it at 2.5fps)

Other things worth trying:
- On 500D, the first timer register has a very high value compared to other
cameras. We might have a nice surprise.
- Try measuring rolling shutter. It might be possible to reduce the jello
effect by a tiny amount (roughly 5% or 10% or improvement in theory)

Caveats:
- On 60D/600D I've removed some features which were working only on those
cameras: that is, shutter speed linked to FPS, and extremely fast shutter
speeds (faster than 1/8000). The math behind FPS is getting complex, so
maintaining two separate versions would mean a lot of work and would be
very error-prone.
- I've removed the slit-scan feature (it's now replaced by high jello mode
in FPS override).

--------------------------

Not related to FPS:

Stability improvements:
- Two new stability tests - these uncovered a bug in the menu backend which
was present in all ML versions that had a menu. This bug caused problems
even if all ML features were disabled (only a blank menu box was enough).
It was caused by a Canon API call which was not fully understood. I've
never noticed that bug in practice (only in automatic tests).
- Menu backend was rewritten using the new dialog box API (and, of course,
passes all current tests).
- Crash logging: ML intercepts ERR70 (maybe other errors too) and saves a
log file which contains the error message from Canon, and also ML version
info. If anything goes wrong, these log files should help me isolate the
problem.

Other important fixes:
- Bracketing (fixed issue 1083).
- HDR video sync fixed in 5D2.
- Bulb ramping might work in 600D (not tested, but a 550D user had the same
problem).

Other enhancements:
- Help for menu navigation keys (should answer all questions like "how to
change cropmarks / intervalometer / bracketing settings / etc").
- For items with many values (for example, audio gain), use SET +
Left/Right, rather than SET/PLAY. Hopefully a bit more intuitive.
- UniWB support (in the white balance submenu).
- For 50D, open ML menu with the Delete button - like in all other cameras.
- Highlight++ was moved under ISO submenu (renamed to Clipping Point). This
is still under research. I've added a function (ISO submenu: Maximize
dynamic range), which will auto-detect the optimal clipping point (that is,
it lowers digital gain as much as possible, while keeping white at 255). My
preliminary advice is to set a full-stop ISO (100, 200... 1600) and then
run ML routine for optimizing digital gain.

Sztupy's extensions:
- PTP support for ML controller is enabled, but not tested. I did not
change anything here.
- Plugin support is enabled, but fully optional. If you copy the extra
files from Sztupy's zip (
http://groups_google_com/group/ml-devel/browse_thread/thread/7bfc8b67...),
you will have Lua scripting. If not... ML will not complain.

Full changelog: https://bitbucket_org/hudson/magic-lantern/changesets

With 5D2 I still have a problem with incomplete shutdowns. It doesn't
happen often, but when it does, it would drain the battery completely. I
didn't notice it on the other cameras, and I couldn't find any pattern that
might cause this. Any hint on reproducing this problem is welcome.

Administrative: I've disabled the mirroring of ML issues on the group. You
can still monitor them here:
https://bitbucket_org/hudson/magic-lantern/issues

Cleanup: memory usage starts to increase (a bit too much for my taste), so
I'm listening to your suggestions - what features can be removed to keep
code size down? Maybe they can be refactored as Lua scripts or plugins.

This autoexec should run on 550D 1.0.9, 60D 1.0.1, 600D 1.0.1, 50D 1.0.8,
500D 1.1.1 and 5D2 2.1.1. That is, it still runs on the old firmware
versions. The source code is prepared for latest Canon upgrades (if you
compile from source, you will get an autoexec for 50D 1.0.9, 5D2 2.1.2 and
600D 1.0.2), but I prefer to post binaries for the old firmware versions
until I'll be ready for the next major release. This is to make the upgrade
process less confusing for users.

I did not do any extensive testing, so expect rough edges. But as a proof
of concept it should be okay.

That's it for today. Thanks to everybody for not losing the faith, for
keeping the development and the discussions alive, and for your continued
support!

2012年1月26日更新
地址：http://groups_google_com/group/ml-devel/browse_thread/thread/35ea6794e94a1cf8/144c61b89ae8019f?show_docid=144c61b89ae8019f
固件下载地址：
http://groups_google_com/group/ml-devel/attach/144c61b89ae8019f/autoexec.bin?part=4
只有autoexec.bin 覆盖到圣诞节版本里头就是了

春节期间漏了好几次更新，现在用起来界面完全俩样了
3fps微速依然存在，只不过快门强制1/3没了？跑哪去了？跑到EXPO里头的shutter里头 按Q 选择 MOV模式 快门可以与fps联动
其它更新就是不同方式的渲染 红色 灰色 啥的（LV中使用，只是渲染数值颜色，不影响取景画面效果）
还有就是可以调节液晶屏的对比度灰度（只影响LV下得取景内容）
其它杂七杂八的

我也是这种情况 官网有中文说明 http://magiclantern_wikia_com/wiki/Unified/Install/CHS

写了：

故障诊断
请确认所有仓盖处于关闭状态，如果SD卡槽盖或电池仓盖是开启的，那么相机不会启动！
如果相机无法开机（死机状态）， 取出电池和存储卡。然后重新装入电池并启动相机，再将一张格式化过的空白存储卡装入相机内，确认相机没有故障，再尝试启动Magic Lantern固件。
如果SD卡指示灯处于闪烁状态，则表示Magic Lantern无法识别固件版本，请按第一步进行下载更新，即使你的固件处于相同的版本号。
再次强调，切勿在修改过的卡里没有autoexe.bin的情况下启动相机，如果发生这种情况，立即在5秒内取出电池，仅关闭开关是不够的！！！
仔细阅读issue tracker寻找类似问题，如果找不到解决方法，可以发布一条新的问题。
Retrieved from "http://magiclantern_wikia_com/wiki/Unified/Install/CHS"

无法调整泡脚
读卡灯亮我也一样 ，对待机没多大影响也就没去理他

楼主想咨询个问题。60D的机身，刷最新的圣诞版本成功。开机使用时，发现读卡器的指示灯会周期性的闪烁，间隔大约是5秒，机身设置1分钟休眠，休眠后闪烁停止，退出休眠后不闪烁，当半按快门对焦后闪烁继续直到再次休眠。这样的现象是否遇到过？是否正常？

期待更强大的功能升级