楼主，能发一套6.2.1 for 美能达Ｄ４（windowsxp）的安装和※※※给我吗？
我的邮箱jiaox@bankcomm.com
在这里先拜谢了

本人用Canon 8400f
也请麻烦楼主发个给我吧！
apoglass@163.com

哪位知道silverfast 有个HDR Studio 是什么作用？还没有仔细研究。好像说48BIT，RAW什么的。我下载装上了，用MATE的破解也可以！！！就是还没空试。哪位知道的讲讲。

谢谢楼主的回信,顶!

Division兄..謝謝了

汗，为何我到现在都没收到破解？！！

way@lomoway.com

Division兄..谢谢了..MATE兄寄给我的破解..里面的帮助我打开是乱码可以麻烦你将属性贴到帖子上吗?再次谢谢

请给我发一份 henryh@dongfeng.net.cn 。先谢过了！

如果是完全干净的一个系统（还没有装过NIKON或SILVERFAST），首先装NIKONSCAN3.12，测试正常后，安装SILVERFAST，在最后一步不要选择安装ASPI，然后安装从SILVERFAST网上下的旧版ASPI4.6（不是新的4.72），就可以了。

如果您顺序装反了，或者装了ASPI4.72 后出现了问题，那就要全部卸载，然后按下面这个指示删除一些文件，再重新按上述方法安装。

Q: How to correctly (re)install SilverFast software for NikonM devices.
NikonM devices are: LS30/40, LS2000/4000 and LS8000.

A: conditions
1. prior to install SilverFast please completely delete older versions of SilverFast(NikonM).

2. Please DO NOT INSTALL NikonScan 3.0 or 3.1 subsequently on your computer as NikonScan software will possibly overwrite files that are commonly used and might replace necessary files with older versions of the same files!
No such problem as long as NikonScan was installed before SilverFast software.

3. If using SilverFast with Nikon LS 30/2000 the Chip-release (Firmware release) of that scanner must be ver. 1.31. Please refer to http://www_nikontechusa_com

How to uninstall older SilverFast(NikonM) software completely?
Location(s) of SilverFast program files are:

SilverFast as Photoshop plug-in on Macintosh:
(Macintosh hard disk) ...Adobe / Photoshop / Plugins / Import-Export / SilverFast(NikonM)
- delete the entire subfolder "SilverFast(NikonM)" if present

SilverFast as Photoshop plug-in on Windows:
- use the system’s uninstall routine first and subsequently search for remnants of Silverfast here:
(hard disk) ...Adobe / Photoshop / Plugins / Import-Export /
- delete these files: "SilverFast(NikonM).8ba" and "SF_logfile.txt" if present

- also delete the entire subfolder "SilverFast(NikonM)" if present

SilverFast as TWAIN software on Macintosh:
(system hard drive) / System folder/ Preferences / TWAIN / SilverFast(NikonM)
- delete the entire folder "SilverFast(NikonM)" with all subfolders

SilverFast as TWAIN software on Windows:
(hard drive) / windows resp. winNT / TWAIN_32 / LaserSoft /
- delete these file: "SilverFast(NikonM).ds" if still present
- also delete the entire folder "SilverFast(NikonM)" with all subfolders, if still present.

Location of Nikon communication files on Macintosh:
system hard disk / system folder / preferences / Nikon Maid
- delete the entire "Nikon Maid" folder

Location of Nikon communication files on Windows:
drive:\Program Files\Common Files\Nikon\Maid Mods
- delete the entire "Maid Mods" directory, if present

Location of Nikon device extensions on Macintosh:
system hard disk / system folder / system extensions
- delete all extensions with the word Nikon in it’s name.

Location of Nikon device drivers on Windows:
- delete these files if any of them exist after you ran the software deinstallation routine:
Windows 98/Me
drive:\WINDOWS\SYSTEM\CML2.dll
drive:\WINDOWS\SYSTEM\LS2000.md3
drive:\WINDOWS\SYSTEM\NKD_SCSI.dll
drive:\WINDOWS\SYSTEM\NKScnUSD.1
drive:\WINDOWS\SYSTEM\SDCLW32.dll

Windows 2000/XP*
drive:\WINNT\SYSTEM32\CML2.DLL
drive:\WINNT\SYSTEM32\LS2000.MD3
drive:\WINNT\SYSTEM32\NKD_SCSI.DLL
drive:\WINNT\SYSTEM32\SDCLW32.DLL

*on XP the path goes: :\WINDOWS...

希望上述这段对您没问题。另外，我用的是LS2000，不一定对别的型号适用，尤其是别的牌子。

谢谢楼主..我也收到了
可否请 Division兄将安装过程步驟写出来
因为我收到的帮助是乱码..谢谢

也来申请一个，感谢你的馈赠。
mingchi_li@hotmail.com

请来一个：tylt@21cn.com
谢谢楼主。

能给我发一份爱普生4870的吗?先谢啦!yelm@zjip.com

需要一个破解程序，我的扫描仪是canon9900F，系统是WindowsXP sp2，谢谢无私奉献。
anadol@163.com,或wang.wei852@163.com

mate dx：请给一份破解，谢谢e-mail：yulin718@aol.com